IRiver IDP-100 MP3 Player User Manual


 
FUNCTION CONTROL(general/Display)
LOAD DEFAULT VALUE
: Initialize to original factory setting.
Select YES
/ BACK (To confirm)
FIRMWARE UPGRADE
: You can upgrade the Operating System of the
player by downloading the firmware upgrade
from the internet.
(Log on to
www.iriver.com or
www.iriveramerica.com)
Select YES
/ BACK (To confirm)
DISPLAY
BACK LIGHT
OFF : Backlight is always off.
BUTTON ON : Activates Back Light to say
on as follows.
1: about 3 sec. 2: about 5 sec.
3: about 10 sec.
ADAPTER BUTTON ON : Backlight is
always on if adapter is connected.
Otherwise:
1: about 3 sec. 2: about 5 sec.
3: about 10 sec. 4: Always
21
FUNCTION CONTROL(general)
GENERAL
BEEP VOL
: Configure beep sound ( Steps : 0, 1, 2, 3 ) with
volume level.
RESUME
: When activated, player returns to the same
settings after STOP or Power OFF.
Note : can not operate in AAC format.
FADE IN
: When activated, volume increases gradually at
playback mode to prevent sudden loudness.
LANGUAGE
: Display proper fonts for tracks and ID3 tag
information, which differs from the PC operating
system in a different language.
-Ex) If a file or directory is recorded in English,
set the Language option to “ENGLISH”.
20