Filter
Top Products
iPod Docking Station. IT-6022
USER’S MANUAL
PLEASE READ CAREFULLY BEFORE USE
Table of Contents
IMPORTANT SAFETY INSTRUCTIONS
2
Operating Element Diagram
3
Power Source: Connection
4
Audio/Video Connection
5
General Operation
6
iPod Operation
7
Radio Operation
7
“AUX” Mode: Listening to an External Audio Device
8
Clock: Setting the Time
8
Clock: Using the Alarm
9
Troubleshooting
10
Specifications
10
2
CAUTION: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
WARNING: To prevent electric shock, do not use this (polarized) plug with an extension cord, receptacle
or other outlet unless the blades can be fully inserted to prevent blade exposure
WARNING: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to laser
beam.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions
3. Heed all warnings
4. Follow all instructions
5. Do not use this apparatus near water. This apparatus shall not be exposed to dripping or splashing, and no
objects filled with liquids, such as vases, shall be placed on the apparatus.
6. Clean only with a dry cloth
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. The apparatus
should not be situated on a bed, sofa, rug or similar surface that may block the ventilation openings. The
apparatus must not be placed in a built-in installation, such as a closed bookcase or cabinet that may impede
the flow of air through the ventilation openings. Ventilation should not be impeded by covering the openings
with items such as newspapers, tablecloths, curtains, etc.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that product heat. Extended exposure to temperatures higher that 170 degrees Fahrenheit, for
example inside a closed vehicle during the summer, may result in damage to your product.
9. No open flame sources, such as lighted candles, should be placed on the apparatus.
10. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for the replacement of the obsolete outlet.
11. Protect the power cord from being walked on or pinched – particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
12. Do not install in an area which impedes the access to the power plug. Disconnecting the power plug is the
only way to completely remove power to the product and must be readily accessible at all times.
13. Power source – Use only power supplies of the type specified in the operating instructions or as marked on the
appliance. If a separate power supply is included with this apparatus, do not substitute with any other power
supply – use only manufacturer-provided power supplies.
14. Unplug this apparatus during lightning storms or when unused for long periods of time.
15. If the unit will be unused for long periods of time, the batteries should be removed.
16. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damages
in any way: the power-supply cord or plug is damages, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped
17. For products which incorporate batteries, please refer to local regulations for proper battery disposal.
FCC WARNING: Changes or modifications to this unit not expressly approved by the party responsible for
compliance will void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio or television reception. If this equipment does cause harmful interference, which can be determined by
turning the equipment off and on, the user is encouraged to try to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Move the transmitter to a different physical location.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- If you cannot eliminate the interference, the FCC requires that you stop using your headphones.