Filter
Top Products
2-2
pool area, plug the battery charger into a 115VAC outlet. Attach the cable
from the battery charger to the Charger connector on the Infinity con-
nection panel, shown in Figure B below. Turn the power switch to Off to
charge the battery. Keep the charger plugged in until the next use.
The charging circuit in the Infinity prevents overcharging, allowing you to
leave the battery charger plugged in for extended periods of time without
damaging the battery or any other components. If you do not use your
Infinity for two or more months, recharge the battery before use. It is nor-
mal for rechargeable batteries to lose some power when not in use.
The battery will lose 20% of its charge in two to three months if it
is not left plugged in.
Note: Make sure the power switch is in the Off position while charging.
An optional spare battery and external charger (BP-3) are also available
for facilities to ensure that their Infinity always has a charged battery
ready.
Note: Do not change the internal battery near water. Bring unit to a dry
location before removing internal battery.
Figure B: Infinity Connection Panel
Battery Life
Indicator LED
12v Battery
Charger Input
Speaker Volume
Control
Wired Microphone
or External Strobe
Inputs
CTS Timer Output
External Speaker
Power Switch