8
Playing a CD
Playing a Standard CD for Karaoke
Step 1: Press the Power Button to turn the unit on.
Step 2: Load the CD disc into the unit’s CD drive.
Step 3: Adjust the Source Dial to CDG.
Step 4: Press the Play/Pause Button to play the loaded disc.
Step 1: Press the Power Button to turn the unit on.
Step 2: Load the CD disc into the unit’s CD drive.
Step 3: Adjust the Source Dial to CDG.
Step 4: Press the Play/Pause Button to play the loaded disc.
Step 5: Plug in the included microphone to the Mic 1 Connection. Adjust the
On/Off Switch on the microphone to the On position.
• If feedback noise is present, move the microphone away from the unit
and/or reduce the microphone’s volume.
Step 6: Adjust the Volume Dial to adjust the volume of audio output from the
speakers. Adjust the Microphone Volume Dial to set the volume of a
connected microphone.
Step 7: Turn the AVC Select Dial to Music or Vocal.
• In Music Mode the CD’s track vocals can not be cut out completely
even if the AVC Dial is set to the maximum.
• In Vocal Mode, the CD’s karaoke track vocals can be cut out
completely, the same as playing a CD+G disc.
Step 8: Use the AVC Dial to adjust the balance between the music and vocals.
Step 9: Press the Play/Pause Button to play or pause the loaded CD.
IJ328-IB.indd 8 7/10/2008 2:21:42 PM