iHome IP45 Clock Radio User Manual


 
iP45 IB
4
Your iP45 comes with an internal lithium ion battery for portable operation. As noted above, the internal battery charges when
the unit is connected to AC power. A battery status indicator is located to the right of the clock display. When the indicator
is low and flashing, you will need to connect the iP45 to AC power to recharge the battery. When the indicator is full and
steady (not flashing), the battery is fully charged.
Note: the iP45 will not charge an iPhone or iPod while operating on battery power.
End-Of-Life Battery Disposal Instructions
This device uses a Lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try
charging it several times. If the battery does not recharge, please contact us for repair information. Please do NOT attempt
to change the battery yourself. If the battery has died and you do not want Manufacturer to replace your battery, you should
follow the disposal instructions below.
Consult local laws and regulations for proper battery disposal in your region. If there are no local regulations concerning
battery disposal, please dispose of the device in a waste bin for electronic devices.
Caution: The Battery used in this device may present a risk of fire, explosion or chemical burn if mistreated
Battery shall not be exposed to excessive heat such as sunshine, fire, or the like. Do not use or charge the battery if it appears
to be leaking, discolored, deformed, or in any way abnormal. Do not leave your battery discharged or unused for extended
periods of time. When batteries are misused, they may explode or leak, causing burns and personal injury. If your battery
leaks, use normal precaution and discard the battery immediately.
Charging the Internal Battery