IBM 760E/ED (9546) Clock Radio User Manual


 
The keyboard is opened.
The specified time has elapsed from the last
operation with the keyboard, mouse, hard disk drive,
parallel connector, or diskette drive; or the AC
Adapter is plugged in. The time is specified by
Suspend Timer
in the ThinkPad Features program.
The battery condition is low. The battery power
indicator blinks orange.
In the ThinkPad features program, the computer can
be set to “Hibernate when battery becomes low.” The
default setting is suspend.
Either the
PS2 OFF
or
PS2 SUSpend
command is
set in the ThinkPad Features program.
Events that cause the computer to exit or resume suspend
mode:
(Resume) The LCD is opened.
(Resume) The keyboard is closed.
(Resume) The real time clock alarm is signaled.
(Resume) The ring indicator (RI) is signaled by a
serial or PCMCIA device.
(Resume) The Fn key is pressed.
(Resume) An external keyboard key is pressed while
operating with ac power.
(Exit) Timer conditions are satisfied for entering
hibernation mode.
Hibernation Mode: When in hibernation mode, the
following occurs:
The system status, RAM, VRAM, and setup data are
stored on the hard disk.
The system is powered off.
Any of the following events can cause the computer to
enter hibernation mode:
Hibernation mode is requested by the Fn key
(Fn+F12).
Timer conditions are satisfied in suspend mode.
A critical low battery condition occurs.
The PS2 HIBernation command is set in the
ThinkPad Features program.
Notes:
1. In the ThinkPad Features program, the computer
can be set to “suspend hibernate while docked.”
2. The computer cannot enter hibernation mode
when:
It is powered with ac power and a
communication PC card is used.
The computer is attached to a DOCK I.
ThinkPad 760 (9546, 9547) 357