Filter
Top Products
19
A.P function (Auto storage/ Preset memory scan)
Preset scan: press A.P button for less than 1 second to scan all preset stations in the memories of the current
band and stay on each memory stations for about 5 seconds. The memory location indicator on the LCD
will flash during the process. To stop preset scan, press A.P button again.
Auto memory store: press A.P button for more than 2 seconds to enter auto store mode. The radio will
automatically store 6 stations to the 6 preset memories of the current band. To stop auto store, press A.P
button again. When the auto-storage operation is completed, it will automatically perform for 5 seconds each
time. After finishing 1 loop of memory scan, it will listen to the first memory station in the current band.
Scan function
Press it to scan up by one channel step with station detection. If a valid signal has detected, the current frequency
is blinked within 5 seconds, then press it again to stop scan and remain the current frequency; otherwise, the unit
continue to scan up by one channel step with station detection 5 seconds later.
AF function (Alternative Frequencies)
AF mode: Press AF button shortly to turn on or turn off the AF function. If the AF function is on the display
will show “AF”. When AF switching mode is selected, but RDS information is not received yet the “AF” will
be flashing.
The RDS program will be automatically searched and received. After turning on, if the RDS signal is week or
even no signal, the unit will search another frequency with this RDS program.
Region mode: Press and hold AF button for one second, the unit will be under REGION ON or REGION OFF
mode:
- REGION ON: PI code will be searched during AF searching. The display will show “REG ON”.
- REGION OFF: PI code and covered area will not be searched.