Filter
Top Products
15
c. Retune mode
To determine the initial time of automatic TA (Traffic Announcement) search.
There are 2 modes: RETUNE L and RETUNE S.
- RETUNE L: 90 seconds.
- RETUNE S: 30 seconds.
Note: Retune mode is active for TA SEEK mode only.
d. Mask mode
During AF search, PI stations and non-RDS (Radio Data Station) stations with strong signal will be masked,
in the latter case, the non-RDS stations may cause interference, resulting the real AF to be masked due to the
misjudgment of the radio under interference. Rotate the VOLUME knob to select the desired mode: MASK
DPI M and MASK ALL.
- MASK DPI
To mask only the AF with different PI.
- MASK ALL
To mask both PI and strong signal non-RDS station.
e. Beep mode
There are 3 modes: BEEP 2’nd, BEEP ALL and BEEP OFF.
- Beep 2
nd
: the beep is only generated when an allotted double key is pressed long (1 sec)..
- BEEP ALL: enable audible beep tone when any function is accessed.
- BEEP OFF: disable audible beep tone when any function is accessed.
f. Seek mode
You can choose from Seek tuning mode 1 and mode 2.
While the desired Seek tuning mode is selected, the following operations can be performed:
- SEEK1: Press and hold the
/ button to seek the band in up or down direction and stop when a
station is received.