Filter
Top Products
Advanced Operations (Second VCR)
47
Advanced Operations (Second VCR)
• Integrating a Second VCR
With another VCR hooked up, you can copy videotapes as needed, and you can get
fancy with multimedia programming. For this discussion, we refer to the model VT-
M171A (or M270A)Hitachi as VCR2 and the other unit as VCR1.
Hookup
To hook up a second VCR, you need:
• A video cord with a single jack on each end, and
• An audio cord with a single jack on each end, or
• A two-way cord that has both audio and video jacks
Study the back of VCR2 (VT-M171A or M270A) to find the two color-coded jacks that
are labelled IN. The yellow jack is for video and white is for audio. Locate similar jacks
on VCR1. Then, with the power off:
• Connect VIDEO OUT on VCR2 to the yellow VIDEO IN on VCR1.
• Connect the AUDIO OUT jack on VCR2 to the AUDIO IN jack on VCR1.
Illustration of Hookup
To Control Both VCRs with the Remote Control
If the second VCR that you've hooked up is also a Hitachi, you can set your remote to
operate both VCRs.
• Press GUIDE twice, then press 1 to bring up the Initial Setup screen.
The default setting on the Initial Setup Screen is VCR1, for when you have only one
VCR running.
• Press 4 to set VCR CODE to VCR2.
• Press the VCR2 button on the remote before pressing GUIDE twice to exit the on-
screen program.
With this setting, the remote control can now operate both VCRs. To switch control from
one to the other, simply press VCR1 or VCR2 on the remote. (Remember to aim the
remote at the selected VCR.)
Copying from One VCR to Another (Dubbing)
Consider VCR1 the recording VCR, and VCR2 (VT-M171A or M270A) the playback
VCR. You will play a tape on VCR2 and record it on VCR1. To begin copying:
• Insert the prerecorded videotape in VCR2.
• Insert a blank or erasable tape (with the safety tab intact) into VCR1.
• Press AVX on VCR1 - the LINE indicator will display.
• Press REC/IRT on VCR1, and press PLAY on VCR2.
To monitor the picture as you record, VCR1 must be connected to your TV. The VCR
indicator will light on VCR1's display and you can view the picture being recorded.