Filter
Top Products
6
TROUBLESHOOTInG
SPECIFICATIONS:
Dimensions (H x W x D): 1-3/16” x 4-1/2” x 4-1/2” (30mm x 114mm 114mm)
Weight: 0.37 lb (0.17kg)
© 2008 Harman International Industries, Incorporated. All rights reserved.
Harman Kardon is a trademark of Harman International Industries, Incorporated, registered in the United States
and/or other countries. Designed to Entertain, The Bridge logo and The Bridge II logo are trademarks of Harman International Industries, Incorporated.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries. iPod not included. “Made for iPod” means that an electronic accessory has
been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible
for the operation of this device or its compliance with safety and regulatory standards.
Features, specifications and appearance are subject to change without notice.
SYMPTOM SOLUTION
The iPod does not play or respond to
commands from the receiver’s remote.
• Make sure that The Bridge II is properly connected
to a compatible Harman Kardon receiver.
• Make sure that DMP or The Bridge is selected as
the input on the receiver.
The LED under The Bridge II goes out
when the receiver is in the Standby mode.
• Check the menu setting on your receiver to make sure
that the option to charge iPod while in Standby mode is
turned on, if available.
• Make certain that the receiver is in the Standby mode
by looking for the amber standby light. The iPod will not
charge when the Master Power Switch is off.
The display and controls on the iPod
do not operate in iPod mode.
• This is normal and does not indicate a problem
with the iPod, The Bridge II or your receiver.
TROUBLESHOOTING GUIDE
0057CSK - HK Bridge II All v10.indd 6 10/02/09 10:32:29