Filter
Top Products
68
Freecom MediaPlayer
EN
6
6.3.2 Audio Setup
This is a guide for setting audio output of the Freecom MediaPlayer. You can use Stereo
or Digital 5.1 ch.
Analogue/DCPM: If you connect the supplied audio cables (Red / White)
to TV or Audio set directly.
En
coded Digital: If you want to listen to 5.1 ch / DTS Dolby by connecting
receiver (or amplifier) with the Optical or Coaxial cable.
Setup Procedure
1
.
Turn on the Freecom MediaPlayer and press "SETUP" on the Mode Selection
screen.
2.
Move to the 'Audio Out' icon and press "OK". The setup box will be displayed under
the icon menu.
3.
Select Audio Out Mode, choose "Stereo" or 'Encoded Digital' and press "OK".
4. Press "SETUP" to save configurations.