Filter
Top Products
62
Freecom MediaPlayer
EN
5
This way everyone can get read and write access to the Freecom MediaPlayer without
a problem.
6. Can the Freecom MediaPlayer be left on over night?
Yes your Freecom MediaPlayer can be turned on 24 / 7. Before you turn off your computer
we do recommend that you unmount the Freecom MediaPlayer to limit future problems
with your Freecom MediaPlayer.
7. W
hen adding Freecom MediaPlayer to my computer, it tells me that my ID
and Key are invalid. What's wrong?
You may not have entered all the alpha-numeric values correctly. There are no letter "O"s;
please verify that you have used the number "0" (zero) for anything resembling an "O."
Also please check your other letters as well; two V's may look like a W. Start by entering
only the Freecom MediaPlayer ID. The ADD button should not be grayed out if the correct
ID is entered. Once it is not grayed out, proceed to add the Write Key as well.
Please also make sure that there are 20 characters for the Freecom MediaPlayer ID, not
including the Write Key.
8. I c
annot enable read/write access on more than one machine.
With our current Mac drivers, only one machine can have read/write access at a time. The
other machines will all have read-only access. We are working on a multi-write driver for
Mac, and is expected to be released sometime in the future.
9. W
hy can't my computer go into hibernation or standby?
If you want to use your computer in hibernation or standby, you must have Freecom
MediaPlayer disabled before that can occur. You can disable the Freecom MediaPlayer
through the NDAdmin utility.
10
. It takes over a minute for the Freecom MediaPlayer to show up on my
desktop after enabling.
If you are running your Mac on a wireless connection, this may happen. A wireless con-
nection may take some time to properly obtain a stable connection with the Freecom
MediaPlayer. If your Freecom MediaPlayer is formatted in FAT32, this may also cause
the mount to take long. If you wish to improve the speed, try reformatting the Freecom
MediaPlayer in Mac OS Extended (only if you have a Mac ONLY environment). Later
software releases may increase speeds, so make sure you have the latest driver release.