Filter
Top Products
E10 OPERATION MANUAL
1716
9 SYSTEM SET CODES
CODE NUMBER
00 (factory default setting)
20
25
50
09
10
12
24
22
28
29
76
87 (factory default setting)
IN DISPLAY
10:50
20:25
25:20
50:10
9kHz
10kHz
12H
24H
Ni-MH
76 108
87 108
FUNCTION
Divide the memories into 10 pages
with 50 locations
Divide the memories into 20 pages
with 25 locations
Divide the memories into 25 pages
with 20 locations
Divide the memories into 50 pages
with 10 locations
Set the tuning steps for MW (AM)
to 9KHz
Set the tuning steps for MW (AM)
to 10KHz
Set the clock system to 12 Hr
format
Set the clock system to 24 Hr
format
Check all the segments on LCD
display
Rechargeable battery to be used
Normal AA battery to be used
Set the FM frequency range to
76-108MHz (for Japan)
Set the FM frequency range to
87-108MHz (N.America/Europe)
SYSTEM SET CODE TABLE
System Set Codes allow the radio to be tailored to your needs by changing certain programmable functions.These
functions and their descriptions are noted in the table.
WORKING WITH MEMORY continued
DELETING ALL MEMORY PAGE
CONTENTS
1. Press/release the PAGE button (11).
2. Press/hold the MEMORY button (18) for 5
seconds and then release it.‘Del’ and PAGE
(48, 49) appear flashing in the display.
3. Within 2 seconds, press/release the MEMORY
button.
MOVING A STORED FREQUENCY
A stored frequency can be moved to a different
memory or memory page.
1. Turn on the radio.
2. Press/release the PAGE button.
3. Within 3 seconds, use the UP/HOUR or
DOWN/MIN button to select the required
memory page.
4. Press/release the MEMORY button twice.
5. Within 5 seconds use the numeric keypad to
enter the memory number that you wish to
store the station into.
6. Within 5 seconds press/release the MEMORY
button.
CUSTOMIZING MEMORY PAGES
The E10 is configured at the factory with 10 memory
pages, each page having 50 memories, for a total
of 500 memories.You can change this set-up via
the SYSTEM SET CODES, shown below.