Filter
Top Products
31
Removing Battery
Follow these procedures to remove a Standard
or a High-capacity battery from the horizontal
compartment.
1. To remove a Standard battery, press the
battery forward toward the pins and pull up.
To remove a High-capacity battery, squeeze
and pull back on both of the battery’s side
release buttons and lift up and away from the
charger.
2. When you remove the battery from the
charger, move the orange slide indicator on
the battery to the plus position as a reminder
that the battery is fully charged.
Using the Rapid Travel Charger
1. Connect the charger cable to the bottom of the
radio unit. This will permit the charging of the
standard battery (only) or to power the radio.
2. Plug the AC Adapter into a 120 VAC wall
outlet.
Using Smart Charging Accessories
Some accessories supply power that the radio
controls to charge the battery. Most batteries can be
charged in under 2 hours. When charging has been
completed, or the phone is off, the power is reduced.
The phone may remain connected to the accessory
for as long as you wish.
If the battery has not been used for several
months, connect the radio to the accessory for a few
minutes before turning on the radio.