Filter
Top Products
7
EAGLE8/A/B/C/D/E, MONO8, and FLEX8E use the USBird software. The video
settings are disabled once the audio recorders are connected. Refer to Figure 1-
5 Video Settings
Figure 1-5 Video Settings
IMPORTANT REMINDER!!!
Always press the stop button or set the slide switch to OFF and remove batteries
before you attach the RECORDER to the computer. If the RECORDER has not
stopped recording properly, the recorder will begin recording again, once it is
reconnected to the computer, and receives power. The USBird program notifies
the user the RECORDER is recording.