Emerson iP550 MP3 Docking Station User Manual


 
23
NOTE: If you are using either the 30GB or 60GB fifth generation iPod
®
models with video capability or the 2G (Second Generation) iPod
®
nano,
use the adapters that were supplied with the iPod
®
at time of purchase.
They will fit correctly in the docking cradle of this system.
IMPORTANT!
If you are using a 1G (First Generation) iPod
®
nanoyou must slide the
docking connector to the leftposition before inserting the required adapter
as shown in the following illustrations:
If later you decide to install a different iPod
®
model you must remove the
nano adapter from the docking cradle and slide the docking connector
back to the rightposition before inserting the appropriate adapter.
4.) Slide your iPod
®
into the adapter and make sure that it slides down as far as
possible until it is correctly seated on the iPod
®
connector.
5.) Press the Power button of this system to turn the power On’.
6.) Press the Function button of this
system to select the iPod function.
The “iPodindicator appears in the
display.
iP550_041907.p65 19/4/2007, 17:5623