18
Presetting Stations In The Tuner Memory
The tuner in this system has 40 preset station memories that allow you to store up
to 20 of your favorite AM and 20 of your favorite FM stations.
1.) Tune to the first station that you wish to memorize
by either the Automatic or Manual method above.
Example: FM 93.5 MHz.
2.) Press the TIME SET/MEMORY button once.
The preset number “1” appears and the
MEMORY indicator ‘flashes’ indicating that you
can store your station in memory number 1.
3.) Press the TIME SET/MEMORY button once
more. The MEMORY indicator stops flashing and
your station is stored in memory number “1”.
4.) Tune to the next FM station you wish to store and
press the TIME SET/MEMORY button. The preset
number “2” appears and the MEMORY indicator
‘flashes’.
• To store the station in preset memory number 2, press the TIME SET/MEMORY
button again.
• To store the station in a different preset memory number press the
ALARM/PRESET UP button to advance the display to the desired memory
number before you press the TIME SET/MEMORY button.
5.) Repeat Step 4 until you have stored up to 20 FM stations in the tuner memory,
then press the BAND button to switch to the AM band and follow the same
procedure to store up to 20 AM stations in the tuner memory.
NOTE: After you press the TIME SET/MEMORY you must enter a station in
the memory within 5 seconds while the MEMORY indicator is ‘flashing’. If the
MEMORY indicator stops flashing the station cannot be memorized. If this
occurs press the TIME SET/MEMORY button again and be sure to enter your
station in the memory within 5 seconds.
iP105_052207.p65 22/5/2007, 11:3718