Filter
Top Products
12
1.) Press the TIME SET/MEMORY button once. “12:Hr” appears on the display
and the “12” flashes. This indicates that the display is set for the 12-Hour format
with AM/PM indicators.
This is the factory default setting. You also have the option of displaying the
time in 24-Hour format, also referred to as “Military Time”.
In the 24-Hour format midnight is displayed as “0:00”, “1:00 PM” is displayed
as “13:00”, “6:00 PM: is displayed as “18:00”, etc.
There are no AM or PM indicators in the 24-Hour format. To switch between the
12-Hour and 24-Hour formats if necessary, press either the / or /
buttons while the “12” indicator is flashing.
NOTE: You must begin making adjustments within 5 seconds after pressing
the TIME SET/MEMORY button, while the display is flashing. If no
adjustments are made within 5 seconds the display stops flashing and
returns to the Time display.
2.) While the “12” indicator is flashing, press the
TIME SET/MEMORY button once more. The
hours and minutes display returns and the hour
digits flash.
3.) While the hour digits are flashing press either
the / or / buttons to move the
hour display back or forward to the correct hour.
Be sure to observe the AM/PM indicator to make
sure you have set the hour correctly.
iP105_052207.p65 22/5/2007, 11:3712