Dynex DX-P9DVD11 Portable DVD Player User Manual


 
8
Connecting to a 12V car power outlet
The 12V car power adapter lets you use your DVD player in vehicles that have a 12V, negative
ground electrical system.
Cautions:
Do not use in 24V vehicles or you could damage your DVD player.
Use the provided 12V car power adapter only. Use with other car power adapters could
damage the unit.
The 12V car power adapter included with this DVD player is for its use only. Do not use
it with other equipment.
In the interest of traffic safety, do not operate this unit or view videos while driving a
vehicle.
Make sure the unit is securely fastened to prevent it from falling or flying through the
air in the event of an accident.
When the inside of the cigarette lighter socket is dirty with ashes or dust, the plug
section may become hot due to poor contact. Be sure to clean the cigarette lighter
socket before use. Make sure the ignition key is off when you clean the socket. Clean
the socket with a dry cloth.
After use, disconnect the 12V car power adapter from both the DVD player and the
cigarette lighter socket.
To connect to a 12V car power outlet:
1 Plug one end of the car power adapter into the DC IN jack on the side of your player.
2 Plug the other end of the adapter into a 12V car power outlet or car cigarette lighter
socket.
3 Turn off your player. The red charge indicator turns on.
DX-P7DVD11-P9DVD11_11-0455_MAN_ENG.fm Page 8 Thursday, June 30, 2011 2:42 PM