Filter
Top Products
10
Using your player
Turning on your player
To turn on your player:
1 Slide the ON/OFF switch on the side of your player to the ON position.
2 The start-up picture (DVD VIDEO) appears on the screen.
3 After use, slide the ON/OFF switch to the OFF position.
Playing a DVD or audio CD
Notes:
• Most DVDs and your player have region codes that help control illegal distribution of
DVDs. The region code for your player is 1. You can only play DVDs with a region code
of 1 or ALL. The region code for a DVD is printed on the DVD or the DVD packaging.
• This owner’s manual explains the basic instructions for operating this unit. Some
DVDs are produced in a manner that allows specific or limited operation during
playback. Therefore, this unit may not respond to all operating commands. THIS IS
NOT A DEFECT. Please refer to the instructions accompanying the specific DVD in
question for more information about the options available on that DVD.
• “ ” may appear on the screen during operation. A “ ” means the desired
operation is not permitted by the unit or disc.
To play a disc:
1 Make sure that your player is connected to power or that the battery is charged.
2 Slide the ON/OFF switch on the side of your player away from you to turn your player
on.
3 Slide the OPEN switch on the side of your player towards you to open the disc door.
The disc door opens.
4 Place a disc, label side up, in the disc tray, then close the tray. The disc starts playing
automatically. If playback does not begin automatically, press /OK on the player.
Controlling DVD or audio CD playback
To control disc playback:
• Press STOP once to stop playback. Your player remembers where you stopped. If you
press /OK, your player starts playing at the point where you stopped.
• Press STOP twice to stop playback. If you press /OK, your player starts playing at
the beginning of the disc.
Note: When playing an audio CD, press STOP twice to stop playback and return the player to
the beginning of the CD.
• During playback, press /OK to pause playback. Press this button again to resume
playback.
• Press to fast-forward on the disc. Each time you press this button, the
fast-forward speed changes from 2 to 4 to 8 to 16 to 32 times the normal speed. To
resume normal playback, press /OK.
DX-P7DVD11-P9DVD11_11-0455_MAN_ENG.fm Page 10 Thursday, June 30, 2011 2:42 PM