Filter
Top Products
Getting Started
Making Connections
There are several different connection options available with the RP300A. Before connecting
the RP300A, make sure that the power to your amplifier and the RP300A is turned off. There
is no power switch on the RP300A. To turn the RP300A on or off, simply connect or
disconnect the included PS0913B power supply from the Power Jack to an AC outlet.
Mono Operation
Connect your guitar to the Input of the RP300A. Connect a single mono instrument cable
from the Left Output of the RP300A to the instrument input or effect return on your
amplifier, to a channel input of a mixer, or to the line input of a power amp. If connecting to a
mixing console, be sure to selecton one of the RP300A’s Speaker Cabinet models. See page 12
for more on using the Speaker Cabinet modeling.
Stereo Operation
For stereo operation connect the guitar to the Input of the RP300A. Connect the Left
Output to the input of one amplifier, channel of a mixer, or power amp. Connect the Right
Output to a second amplifier, second channel of a mixer, or power amp. If connecting to a
mixing console, set the pan controls of the mixer hard left and right in order to retain stereo
separation and be sure to selecton one of the RP300A’s Speaker Cabinet models. See page 12
for more on using the Speaker Cabinet modeling..
NOTE: When using a guitar amp, it may be best to connect the guitar to the Input of the
RP300A and the Output of the RP300A to the effect return of the amplifier.
4