Filter
Top Products
6. Press the PLAY button on the
player face (Depends on the DVD
title, press the ENTER button)
In general, the DVD already inserted
into the player will start reading
automatically when power is turned
on.
The DVD player will immediately start rendering
the DVD program.
When you want to stop, press the STOP button, it
will return to the logo. To power off the unit, slide the
ON/OFF switch to the OFF.
The DVD player will automatically power off in 20
minutes after entering screen saver mode. To reset
the unit, first slide power switch to ‘OFF’, and then
slide it to ‘ON’.
Quick Starting Guide
!
Quick Starting Guide
1. Connecting to an External Power Source
Connect the power cord (supplied with the player) to the
side input plug and to a wall outlet. Do not use any other
device otherwise specified by your dealer.
2. Open the protective cover
The cover opens only to a maximum
135
o
, so please do not try to open it any
further.
3. Press the open button on the left to
open the disc cover
Never press the OPEN button on the left
during playback.
4. Inserting a DVD disc
Align the centre of the DVD disc with the centre of the
disc guide. Press gently down on the DVD to snap the
disc into place, then close the disc cover.
5. Slide the side power switch to ‘ON’.
If you want to replace the disc or if you want to remove
the disc, you should press STOP twice, wait until disc
has finished spining, then press the OPEN button, and
take it out.
!
1211
5
ON/OFF