Filter
Top Products
Please your televideo
◆
Horizontally on a flat, steady base so that air can circulate around it for ventilation.
◆
Away from humidity and heat, magnetic fields, such as those from loudspeakers
etc. and with no heavy objects placed on top.
4
INITIAL
installation
Connecting up the televideo
Fitting the remote control’s batteries
Switch off all components when connecting or disconnecting cables.
◆
Plug the aerial cable into “ANT” socket of the televideo.
◆
Make sure the rating of the household mains supply matches the rating
shown on the back of the televideo.
Now plug in the mains lead.
◆
Fit the batteries, size 1.5V AAA as shown above
◆
Protect your environment by returning used batteries to your dealer. Since
batteries contain toxic substances they require special disposal methods.
◆
Make sure the batteries are always of the same type and age, and remove
them from the remote control if you not using it for a long period.
1
Remove the battery
cover on the reverse
side of the remote con-
trol.
2
Install two batter-
ies(“AAA” size)into the
remote control.
3
Replace the battery
cover