Filter
Top Products
11
Recording
CASSETTES
Timer recording
Timer review - erasing or changing
Auto tracking
◆
For timer recording, clock, date, and stations
must be set correctly.
◆
Load a cassette with its safety tab in place and
with sufficient free space for the recording.
◆
To enter station numbers using the cursors
VW
.
◆
You can switch your televideo off during recording.(Don’t use the main power button
(ON/OFF) on the front panel of the set.)
The televideo will switch on and off automatically to record the timer event.
◆
If you have made a mistake, move to the position you want to change using the
VW
CB
button and change the setting.
◆
The recorder will eject cassettes which have the safety tab removed.
◆
If you wish to record from a satellite receiver select under “Pr” the satellite programme
location or AV (depending on the connection with the antenna cable or a SCART cable.)
NB : Leave the satellite tuner switched on and to the programme you want to record.
E
Timer programming
No. Pr. Date Start End SP/LP
1 01 02 09:25 03:12 SP
2 --- --- --:-- --:-- SP
3 --- --- --:-- --:-- SP
4 --- --- --:-- --:-- SP
5 --- --- --:-- --:-- SP
6 --- --- --:-- --:-- SP
VW
: Change CLEAR : Delete
CB
: Select MENU : Return
: Store
Call the televideo’s “Main menu”, choose”Timer
programming”.
Select a free timer memory.
Set ......
- the date (date, daily = osd is displayed ”day”, sun~ sat)
- start and end time.
- the recording speed.
Call the televideo’s “Main menu”, choose “Timer programming”.
Select the programming to erase or change If you want to erase this programming press button CLEAR.
If you wish to make changes :
Move to the position you want to change using the VW CB buttons.
Change the setting using the VW buttons.
If you press the 0/ATK key in Playback mode, the televideo will operate the auto tracking function again.