Filter
Top Products
16
Connections and
ASSEMBLING
Scart socket
This is used to connect : a VCR a CAMCODER and a video game console or satellite TV receiver or DVD.
In most cases, the set changes automatically to AV mode, when the VCR connected is in playback mode.
If not, press the AV button on the remote controller.
The AV will be displayed on the screen with the current programme number.
In AV mode, you can change the TV programme number with the
VW
buttons or the Number buttons 0~9.
You must turn the external equipment off to return to the TV mode or press the button.
◆
In SCART Slow SW mode, when you insert the tape without tab, it will playback.
But, in SCART Fast SW mode, when you insert the tape without tab, it will not playback and only loading.
◆
If you insert the SCART plug in playback status it will change to scart mode and VCR will be modified to stop
mode.
PIN Signal Designation Matching Values
1 Audio Out (linked with 3) 0.5Vrms, lmp < 1kΩ (RF 60% MOD)
2 Audio In (linked with 6) 0.5Vrms, lmp > 10kΩ
3 Audio Out (linked with 1) 0.5Vrms, lmp < 1kΩ (RF 60% MOD)
4 Audio earth
5 BIue earth
6 Audio In (linked with 2) 0.5Vrms, lmp > 10kΩ
7 Blue In 0.7Vpp
+
3dB, lmp 75Ω
8 Slow (Function) Switching TV : 0-2V, PERI : 9.5-12V, lmp > 10kΩ
9 Green earth
10 NC
11 Green In 0.7Vpp
+
3dB, lmp 75Ω
12 NC
13 Red earch
14 NC
15 Red In 0.7Vpp
+
3dB, lmp 75Ω
16 Rapid Blanking Switching Logic 0:0-0.4V, Logic 1:1-3V, lmp 75Ω
17 Video earth
18 Rapid Blanking Earth
19 Video Out 1Vpp
+
3dB, lmp 75Ω
20 Video In 1Vpp
+
3dB, lmp 75Ω
21 Common earth