Filter
Top Products
11
Connecting to a TV
GOOD
TV Audio Input
Red
White
TV Video Input
Yellow
6. Press the ON button which
is combined with the PLAY
function again to start
playback.
In general, the DVD already
inserted into the player will start
reading automatically when
power is turned on.
The DVD player will immediately start rendering
the DVD program.
When you want to stop, press the STOP button, it
will return to the power-on logo.
To power off the unit, press the OFF button and
hold on for about 2 seconds.
The DVD player will automatically power off in
three minutes after entering screen saver mode.
Quick Starting Guide
SETTING UP YOUR PLAYER
Step 1:connect the audio cables to AUDIO OUT of the
DVD player.
Step 2:connect the yellow cable to the VIDEO on the
side of your player.
(For TVs that support S-Video Output please follow the
diagram “BETTER” bellow.)
• When connecting to a TV with PAL system, at first you
should set the video output to TV from the setup menu
(press SETUP, select TV under Component/ Video) then
press P/N on the remote to set PAL for the default system
is NTSC.
12