Craig CMP622E MP3 Player User Manual


 
Battery Indicator
= Battery full power.
= Battery empty, connect the unit to the computer for recharging. It would take
about 4 hours to fully recharge the battery. During charging, you can playback the music,
videos or photos at the same time.
Basic Operation
1. Power On/Off:
1.1 Power On:
Slide the Power ON/OFF Switch to ON position to power on the player.
1.2 Power OFF/Standby:
In power on or playback modes, press and hold the >II Button to power off
(Standby mode) the player. To power on the player again from the standby mode,
press and hold the >II Button again, or
Slide the Power ON/OFF Switch to OFF position to power off the player.
(NOTE: If long period of time will not use the player, recommended to power off the
player by the Power ON/OFF switch.)
1.3 Volume Control:
In the playback mode, press the VOL button then press the >>I or I<< button to
adjust the volume as desire.
1.4 Phones Jack:
Insert the included Earphone to the Phones Jack on the bottom of the player.
14