Filter
Top Products
22
COWON A3
Advanced Features
8. COMPONENT, S-VIDEO OUT Usage
■ Connecting a Cable
Connect the High quality TV cable to the “COMP/S-VIDEO” Jack of your A3 and the “COMPONENT IN/S-VIDEO IN” of the external AV device.
For audio, connect “AV OUT” of A3 to “AUDIO IN” of the external AV device using AV cable.
Change the input mode of AV device. For more information, check the manual of your AV device.
Move the switch at the bottom of A3 to “AV OUT” and the screen from A3 will be displayed on the external AV device.
- If the screen does not display properly check the following.
- Check to see of the switch on the bottom of A3 is set to “AV OUT”.
- Settings in Setup - Display - TV Standard are valid. (Select either NTSC or PAL)
- Choose Setup ->Display ->AV Out -> select “Component” or “S-Video”
- To the external AV machineries and tools according to A3 “AV OUT” sets only the terminal of one in Component or S-Video connects and does.
The case product which will connect Component and S-Video in same time malfunction is a possibility of doing.
- Ensure the input jack and input channel are the same. (If connected to external input 1, must be set to external channel 1 for properly operation.)
- If external AV device does not support Component(p), select Component(i).
Television
RED
RED
GREEN
BLUE
YELLOW
S-VIDEO Out (View)
WHITE
COMPONENT Out (View)
RED
GREEN
BLUE
Television
RED
YELLOW
WHITE
S-VIDEO Out (View)
COMPONENT Out (View)