Filter
Top Products
Nothing comes close to a Cobra
®
DSC Operation
65
c. If The Station You Called Chose Not To Reply:
NO REPLY will show on your screen.
You will have two (2) choices:
■
RESEND the request.
■
EXIT the Position Request mode.
a. To Resend Your Position Request:
1)
Use the Up/Down buttons to scroll to RESEND.
2) Press the Call/Set button.
b. To Exit The Position Request Mode:
1)
Use the Up/Down buttons to scroll to EXIT.
2) Press the Call/Set button to return to the
Individual Directory menu.
3) Use the Up/Down buttons to scroll to EXIT.
4) Press the Call/Set button to return to the
Call Send menu.
5) Use the Up/Down buttons to scroll to EXIT.
6) Press the Call/Set button to return to
Standby mode.
Resend The Request
Operating Your Radio
64
English
DSC Operation
6. Press the Call/Set button.
Your radio will send the position request and there
will be one (1) of three (3) possible responses:
■
You will receive the position.
■
You will receive a no position data response,
meaning the station you queried is not connected
to a GPS device and cannot send its position.
■
You will receive a no reply response, meaning the
operator of that station has chosen not to reply
to your request.
Choose one (1) of the following:
a. If You Receive A Position:
The requested position with the station name
and MMSI will show on your screen.
1) Press the Call/Set button to return to Standby
mode after you have noted the station’s position.
b. If The Station You Called Cannot Send Its Position:
NO POS. DATA (no position data) will show
on your screen.
1) Press the Call/Set button to return to the
Individual Directory menu.
2) Use the Up/Down buttons to scroll to EXIT.
3) Press the Call/Set button to return to the
Call Send menu.
4) Use the Up/Down buttons to scroll to EXIT.
5) Press the Call/Set button to return to
Standby mode.
Receiving a Position
No Position Data
Operating Your Radio
P
osition Request