Filter
Top Products
DXZ825 29
English
Professional mode/P.EQ operations
P.EQ effect ON/OFF
While the “P.EQ” indication is lit in the display,
the P.EQ effect is set to “ON”.
∗ The factory default setting is “ON”.
1. Press the [A] button and select “P.EQ”.
2. Press the [D] button. “P.EQ” in the display is
changed from blinking to lit or unlit.
∗ When “P.EQ” is unlit, the P.EQ effect is set to OFF.
Note:
• If the P.EQ effect is set to OFF, the adjustment
made in “P.EQ operations” is not reflected in the
music source.
Selecting a P.EQ menu
1. Press the [A] button and select “P.EQ”.
“P.EQ” blinks in the display.
2. Press the [BND] button to select “BASC” (ba-
sic). “BASC” is displayed in the function
mode indication in the display.
3. Press one of the [DIRECT] buttons and se-
lect the desired P.EQ menu.
∗ To select the user memory, press the [BND] but-
ton to select “USR” and press one of the [DI-
RECT] buttons.
Editing/storing a P.EQ menu (User
memory)
1. Select a P.EQ menu which you want to edit
on the basis of.
2.
Press and hold the [T] button for 1 second or longer.
3. Press the [a] or [d] button to select the
item to be adjusted.
There are correction channel, correction
band, selection of the center frequency, gain
adjustment and selection of the Q-curve
available for the items to be adjusted.
∗ For details on each adjustment item, refer to
the owner’s manual supplied with the DPH910.
4. Turn the [ROTARY] knob clockwise or
counterclockwise to make the adjustment.
5. Repeat steps 3 to 4 to complete the adjust-
ment and press the [T] button.
6. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the edited
contents.
∗ You can give a title to the user memory. For
the inputting method of titles, refer to the sub-
section “Entering titles” in section “Opera-
tions common to each mode”.
Digital Radio / DAB Operations
DSP Operations
DAB control function
When a CeNET cable is used to connect a DAB
(DAH913 or DAH9500z) (sold separately), all
functions can be operated.
∗ A Digital Radio (DAB) program can be received
only in Canada.
Listening to the DAB station
1. Press the [FNC] button to select the DAB
mode.
2. When the unit receives a DAB station, the
display changes in the following order:
Frequency channel ➜ service label
Switching displays
Press the [D] button for 1 second during the
Main (service label) display to select Main (ser-
vice label) or Sub (PTY).
Note:
• The display shown in the normal reception mode
and the preset reception mode is the same when
a DAB station is received.
3. When the unit does not receive a DAB sta-
tion, the display changes in the following or-
der:
–Normal reception mode–
–Preset reception mode–
Notes:
• The number of programmes and broadcasting
times depend on the DAB stations.
• When the strength of DAB signals is weak, audio
output is muted.