Filter
Top Products
DXZ825 19
English
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for CD, CD changer and
TV stations. The number of titles that can be en-
tered for each mode are as follows.
Operations Common to Each Mode
5. Press and hold the [ ] button for 2 sec-
onds or longer to clear the title and cancel
title input mode.
Turning the external output
adjustment display on/off
When not using the external output, you can
turn off the “NON-FADER” display.
∗ The factory default setting is “ON”.
∗ Even if the level adjustment display is set to “OF”,
signals can be output from the external output.
1. Press and hold [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select “NON-
FADER”.
3. Turn the [ROTARY] knob clockwise to set
“ON” or counterclockwise to set “OF”.
● ON:
When you press the [A] button, the “NON-
FAD VOL” item is displayed.
∗ The output level can be adjusted.
● OF:
Even when you press [A] button, the “NON-
FAD VOL” item is not displayed.
∗ The output level cannot be adjusted.
4.
Press [T] button to return to the previous mode.
Adjusting the dimmer level
You can adjust the reduced illumination level of
the dimmer.
∗ The factory default setting is “3”.
∗
To use the dimmer, set the dimmer setting to 1 to 5.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select “DIM-
MER LV”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to adjust the reduced illumina-
tion level of the dimmer.
● 1 to 5:
The dimmer operation is performed depend-
ing on the set level 1 to 5.
● OF:
No dimmer operation is performed.
4. Press the [T] button to return to the previous
mode.
1. Press the [FNC] button to select the mode
you want to enter a title (CD, CD changer or
TV).
2. Select and play a CD in the CD changer or
tune in to a TV station for which you want to
enter the title.
3. Press the [D] button and display the main.
4. Press the [T] button. “TTL” appears in the dis-
play and the cursor position flashes.
5. Press the [a] or [d] button to move the
cursor.
6. Press the [D] button to select a character.
Each time you press the [D] button, the char-
acter changes in the following order:
Capital letters ➜ Small letters ➜ Numbers
and Symbols ➜ Umlaut ➜ Capital letters...
7. Turn the [ROTARY] knob to select the de-
sired character. Turning the [ROTARY] knob
clockwise moves the cursor to the next char-
acter; turning it counterclockwise moves the
cursor to the previous character.
8. Repeat steps 5 to 7 to enter up to 10 charac-
ters for the title.
9. Press and hold the [
] button for 2 sec-
onds or longer to store the title into memory
and cancel title input mode.
Clearing titles
1. Select and play a CD in the CD changer or
tune in to a TV station for which you want to
clear the title.
2. Press the [D] button and display the main.
3. Press the [T] button. “TTL” appears in the dis-
play and the display switches to the title input
display.
4. Press the [BND] button.
Mode Number of titles
CD mode 50 titles
TV mode 15 titles
CD changer mode Number of titles
DCZ625 connected 100 titles
CDC1255z connected 50 titles