Filter
Top Products
• To Pause press the ‘PLAY/PAUSE’ button while the disc is playing, the playing time will flash.
Pressing the ‘PLAY/PAUSE’ button again will start the disc again from where it paused.
• To select a track to play press the ‘SKIP FORWARD >>’ or ‘SKIP BACK <<’ button either from ‘Stop’
or ‘Pause’. Each press will change the track number by one.
If the CD is playing, pushing and holding the ‘SKIP >>’ button will advance through the current track
until it is over, then proceed to advance through the next track as long as the button is held down.
Conversely, pushing and holding the ‘SKIP <<’ button will scan in the reverse direction through the
track currently playing and continue through previous tracks as long as the button is held down.
• To stop playing the disc, press the ‘STOP’ button.
REPEAT PLAYING
• To repeat one track, press the ‘REPEAT’ button one time either while playing or in pause.
•To replay all tracks, press the ‘REPEAT’ button a second time either while playing or in pause.
•A third press of the ‘REPEAT’ button will cancel the repeat command.
MEMORY PROGRAMMING. Up to 20 tracks can be programmed.
With the CD stopped press the ‘PROGRAM’ button one time. Select a track to play by pushing the ‘Skip
Forward’ >>❘ or ‘Skip Back’ ❘<< button. Push the ‘PROGRAM’ button again to enter another track to save in
memory. When finished, press the ‘PLAY/PAUSE’ button to start the program. Pressing ‘STOP’ at any time
exits the Program function. Note: When the CD door is opened all programming is cleared.
Random Play Function
Pressing the ‘RANDOM’ button during CD play or stop condition will engage random play. Pressing again will
cancel the function. Note: If the CD has memory programmed, the random function cannot operate until the
program is cleared.
Play Time Mode
Pressing the ‘PLAY TIME’ button changes the time format on the LCD from elapsed time of each track to the
total time remaining on the CD.
Dual Cassette Operation
The 2455AV-02 features dual cassette decks for playback, continuous playback (Deck 2 to Deck 1) and
recording from tape, radio, microphone or CD on Deck 1 only.
Loading a Tape
To load a cassette tape, press the ‘STOP/EJECT’ button on Deck 1 or on Deck 2 to open the cassette door.
Insert tape with playing side label facing you. Close the cassette door to lock the tape in position. Note:
While Deck 1 is in playback mode, Deck 2 must be stopped and not in ‘PLAY’ or ‘PAUSE’ mode for Deck 1 to
playback.
Tape Playback
To play a loaded cassette tape:
1. Set ‘FUNCTION’ button to ‘TAPE’
2. Press ‘PLAY’ Deck 1 or 2.
3. Adjust ‘VOLUME’.
4. Adjust ‘TREBLE’ and ‘BASS’ controls.
To Stop Playback
Press the ‘STOP/EJECT’ key.
To Pause Playback
Press the ‘PAUSE’ key all the way down to lock. To resume play, press the ‘PAUSE’ key again, and release.
To Fast Wind/Rewind
Press the ‘REWIND’ or ‘FAST-FORWARD’ key. Press the ‘STOP/EJECT’ key to stop winding at the desired
position.
During fast winding, regular play, or recording, the tape will stop automatically when its end is reached.
OTHER FEATURES AND FUNCTIONS
Headphone Jacks. Six jacks are provided. One 3.5 mm jack on top and five 1/4” phone jacks on the rear of
the cabinet.
Extension Speaker Jacks. Optional stereo extension speakers (SP-2400 Blaster Buddies) can be plugged
into the 1/4" L (left) and R (right) speaker jacks on the rear of the cabinet.
8 9
One Track Repeat (Flashing)
4:05 5
Program Input Mode
PR:01 — —
Choose Track 4
PR:01 04
Program Input Complete
PR:02 — —
Track
Track
Repeat
Memory
TrackMemory
TrackMemory