Filter
Top Products
To stop a playing CD
Press the ‘STOP’ button. The display shows, “—”.
Note: When you press ‘PLAY’ again the player will return to the first track. The display will show “00” and
then “01”.
To skip forward or backward from track to track during playback
Press the ‘SKIP>>’ button once and the next track will be displayed and begin playing. Press repeatedly to
move forward to the desired track.
Press the ‘SKIP<<’ button once to return to the beginning of the current track. Press repeatedly to skip back
to earlier tracks. Playback resumes from the selected track.
To search forward or backward to a particular point on a track during playback
Press and hold the ‘SKIP<<’ or ‘SKIP>>’ buttons to search forward or backward through the current track.
Playback resumes at the point you release the button.
Program Playback
Up to 20 tracks can be programmed for playback. To program a song sequence:
1. Press STOP first if the CD is playing.
2. Press the ‘PROGRAM’ button. The CD display will show P:01
3. Press the ‘SKIP>>’ and or ‘SKIP<<’ buttons to select the first track to program.
4. Once the desired track is reached, press the ‘PROGRAM’ button to enter the track number into
memory.
5. Repeat steps 3 & 4 to program additional tracks.
6. Press the ‘PLAY/PAUSE’ button to start programmed playback.
Note: The program will be erased when you press the ‘PROGRAM’ button.
Repeat CD Selections
Repeat one or all programmed selections using the ‘REPEAT’ button. Push the button once to replay any
single selection. Push the button twice to replay all programmed selections (in programmed order). Push
the button three times to clear the ‘REPEAT’ function. “REPEAT ONE” or “REPEAT ALL” will appear on the
display when the ‘REPEAT’ button is pushed.
AM/FM Radio Operation
The 2455AV-02 features a AM/FM PLL (phase locked loop) stereo radio and telescopic antenna for local AM
and FM stereo reception. To operate the radio:
1. Plug the unit in.
2. Set the ‘FUNCTION’ selector to Radio.
3. Extend the telescope antenna.
4. Select AM, FM or FM Stereo reception band.
5. Use the Tuning buttons to select the desired station.
6. Adjust antenna for best reception.
Note: The FM “stereo” indicator light will appear on the LED display when an FM stereo station is tuned in.
12 5
V
O
L
U
M
E
T
R
E
B
L
E
B
A
S
S
POWER
PHONES
MIC
C. MIC
BALANCE
DUBBING SPEED
CD SPEED
SPEED+
L
R
SPEED NOR
SPEED-
T
U
N
E
R
•
P
A
U
S
E
M
O
N
O
P
L
A
Y
/
S
T
E
R
E
O
/
T
U
N
E
R
•
S
T
O
P
P
R
E
S
E
T
/
R
E
P
E
A
T
RANDOM
PLAY TIME
PROGRAM
OFF
ON
2X
NORMAL
11
1
4
2
3
6
20
17
14
19
22
23
18
15
16
24
9
10
7
8
21
TAPE PITCH
5
Top View
1. Headphone Jack, 3.5 mm
2. Microphone Jack, 3.5 mm
3. Internal Condensor Mic
4. Power Switch
5. Balance Control
6. Tape Pitch
7. CD Speed: +, Normal, - (15%)
8. Volume Control
9. Treble Control
10. Bass Control
11. Dubbing Speed, Normal, 2X
12. CD Compartment
13. Carrying Handle
14. Random Play
15. Play Time
16. Program
17. Tuner Up
18. Tuner Down
19. Stereo/Mono
20. Play/Pause
21. Stop
22. Skip/Scan Forward
23. Skip/Scan Back
24. Preset/Repeat
25. Power On/Standby Switch
26. CD
27. Tape
28. Tuner, AM/FM/FM Stereo
29. Line In
30. LCD Display
31. 2X Tape Counter
32. Remote Control Sensor
33. Tape Deck 1, Record/Play
34. Tape Deck 2, Play
35. Beat Cut Switch
36. Line In Jacks, R/L Channels
37. Cord Wrap
38. Battery Compartment
39. Right Channel Speaker Jack
40. Left Channel Speaker Jack
41. Line Out Jacks, R/L Channels
42. AC Power Cord
43. Telescopic Antenna
44. Headphone Jacks (Five 1/4”)
45. Voice-Over Mic Jack
46. Voice-Over Mic Volume
47. Wireless Receiver Input Jack
48. Headphone/External Speaker Jack