Filter
Top Products
NOTE: THE INTERNAL SPEAKERS ARE DISABLED WHEN EXTENSION SPEAKERS ARE
PLUGGED IN
Microphone Jack. To record using a dynamic microphone, plug into the 3.5 mm jack (29) on the rear of the
cabinet. A 2.5 mm jack is also provided for use with Califone model 4805AV microphone with remote
Start/Stop.
Remote Sensor. A sensor is built into the 2455AV-02 for use with the RC-2400 remote control.
RC-2400 Remote Control
• The RC 2400 operates most functions available on the boombox controls. It does not, however,
function with some of the tape operations.
• INTRO. One feature added to the remote is the Intro function. This feature will give a preview of
each track for 10 seconds. Press the ‘PLAY’ button while in the CD mode, then press the ‘INTRO’
button. Press the ‘INTRO’ button again to resume normal play. If the ‘INTRO’ button is not pushed a
second time, the preview will continue through the last track. Pushing ‘PLAY’, ‘PAUSE’ or ‘STOP’
will not disengage the Intro function.
• MUTE. Mute is another feature added to the remote. It works with tape, AM/FM and
CD functions.
• 10+. This button allows you to jump forward a number of tracks rather than use the scan forward
feature. From stop, pause or play, pushing the 10+ button once will show a 1 and a flashing –
(dash) see 1-. To jump to track 15 enter 5. To go to track 23 from track 6 press 10+ twice and see
2-. Enter 3 and jump to track 23.
• Other Notes.
- The ‘SCAN/SKIP’ buttons are the same as the ‘Tuner ▲’, ‘Skip forward>>❘’ and ‘Tuner ▼’, ‘Skip
back ❘<<’ buttons on the boombox.
- The ‘REPEAT’ button is the same as the ‘PRESET/REPEAT’ button on the boombox.
- The ‘TIME’ button is the same as the ‘PLAY TIME’ button on the boombox.
Continuous Play (Deck 1 to Deck 2)
1. Set the ‘FUNCTION’ selector to ‘TAPE’.
2. Load prerecorded cassettes into Deck 1 and Deck 2.
3. Press the ‘PLAY’ button on Deck 2.
4. Press the ‘PAUSE’ and ‘PLAY’ buttons on Deck 1.
5. Adjust the ‘VOLUME’ and ‘TONE’ controls.
6. When the tape in Deck 2 reaches its end, it will automatically stop and the tape in Deck 1 will
begin playing automatically.
To Record from Microphone, Tape, Radio or CD
This unit has an ALC (Automatic Level Control) circuit and no further adjustment of the Volume control is
necessary while recording.
Set the ‘FUNCTION’ Selector to:
‘TAPE’ to record from microphone. Plug mic into AM/FM jack to record from radio or into CD jack to
record from CD.
Programming Stations
20 FM stations and 12 AM stations can be saved in memory with the ‘PRESET’ function.
• Select a station to be saved in memory and press the ‘PROGRAM’ button to see ‘_ _’ appear on
the LCD display.
• Press ‘PRESET’ key to choose the desired channel (e.g. channel 1) then press ‘PROGRAM’
again to save.
• Select another station and press ‘PROGRAM’ again, then press ‘PRESET’ to select channel 2.
Press ‘PROGRAM’ again to save.
Press the ‘PRESET’ button to access preset stations until the desired channel is found.
CD FUNCTION
The 2455AV-02 CD player accepts both 12 cm and 8 cm discs and will read CD, CD-R and CD-RW formats.
• Before opening the CD door, the LCD will show dashed lines. Open the CD door and the LCD dis-
play will show ‘Open’. Insert a CD and push door closed and the LCD will display the number of
tracks and total play time of the disc.
• Press the ‘PLAY/PAUSE’ button to play the CD and the LCD display will flash while reading the
disc. Then it will show track 1 and the elapsed playing time.
10 7
Memory Display
AM
950KHz — —
CH
Choose Channel 1
AM
950KHz 1
CH
Reading TOC
———— — —
After Reading TOC
45:06 11
Track
Playing Track 1
0:01 1
Track
Searching Track 1
——: —— 11
Track