Filter
Top Products
Time/Date
Ensemble/Multiplex (Group name)
Frequency
Audio Bit Rate
Signal strength
DLS
Programme Type
BMS05DABIP
8
DAB+ Display Modes
Every time you press the DISPLAY/INFO Button, the display will cycle through the following display
information:
Time and date
The time and date will be the time and date provided by the broadcaster. In the unlikely event that no
clock information is received, the display will show “[No Time]”.
Frequency
The frequency of the present station will be displayed.
Audio bit rate
The display will show the digital audio bit rate being received.
Signal strength
The display will show a slide bar to indicate the signal strength, the stronger the signal, the longer
the bar will be from left to right.
DLS
DLS stands for Dynamic Label Segment which is the scrolling text information provided by the
broadcaster. The information displayed may include song titles, album information etc.
Programme type
This describes the style of the programme that is being broadcast. If the information is not available,
the display will show “[No PTY]”.
Ensemble/Multiplex (Group name)
The Ensemble/Multiplex is the station broadcaster information.
Note: Press and hold the DISPLAY/INFO Button for longer than 2 seconds to view the software
information.
FM Radio
1. To switch to FM, press the DAB+/FM Button. (F. 8)
2. To search for the next available frequency, press and hold the I◀◀ or ▶▶I Buttons. The search
will stop automatically once a station has been found.
3. To manually search for the next available frequency, press the I◀◀ or ▶▶I Buttons or press the
SELECT Button then rotate the VOL/SCROLL Control until the desired frequency is displayed on
the screen.
4. To select audio mode, press the PLAY/PAUSE Button to toggle between the “Stereo” or “Mono”
selection.
Note: The radio will automatically switch between stereo and mono mode, but you can override this
and switch this function manually which is helpful for poor signal reception.
LISTENING TO YOUR RADIO
F8