Filter
Top Products
Charge the batteries
Locate the dual charging unit on a flat surface, within
reach of a mains power socket:
1. Plug the dual charger lead into the back of the charging
unit and the plug into the mains power socket and
switch on.
2. Slide each radio into one of the charging pockets, facing
forward, to begin charging.
To fully charge the batteries from a fully discharged state
takes around 14 to 16 hours.
Your BT Freeway Pro Twin radios are ready for use.
6 Getting started
BT Freeway Pro Twin – Issue 02 – Edition 02 – 04.06.04 – 6196
ᮣ
ᮣ
ᮤ
V
O
X
BT Freeway Pro
M
o
d
e
M
o
n
i
t
o
r
ᮣ
ᮣ
ᮤ
M
o
n
i
t
o
r
WARNING – If using alkaline
batteries
Alkaline batteries need replacing
and CANNOT be charged using the
charging unit.
Charging
Your BT Freeway Pro radios can be
charged when they are switched on
or off. However, it is recommended
that you switch your radios off
whilst charging as the charging
time will be quicker.
The lights on the charging unit will
stay lit even when the battery pack
is fully charged.
Battery low indicator
When the battery power becomes
low the icon will be displayed
to indicate that the battery needs
recharging (or the 3 AA alkaline
batteries need replacing). When
you press you will also hear the
battery low alert tone.
The operation of your radio will
become unreliable when the
batteries are low.
If the charge level becomes too
low, your radio will automatically
switch off to avoid damage to the
rechargeable battery pack.
For optimal battery life either
remove the handsets from the
charger once they are charged or
switch off the charger.
PTT
6196 BT Fway Pro Tw UG [2] 4/6/04 10:17 am Page 6