Filter
Top Products
11
BT Freeway Pro Twin – Issue 02 – Edition 02 – 04.06.04 – 6196
2. Use and to select a channel from 1 to 8.
3. Press to confirm. The selected channel will be shown
on the display.
Selecting a sub-channel (CTCSS)
Each of the 8 channels on your BT Freeway Pro has 38
sub-channels (CTCSS codes). You should select one of
these codes to reduce the interference from unwanted
calls on your radio.
1. Press button twice, quickly in succession, the current
sub-channel number flashes.
2. Then use or to select a subchannel from 0 to 38.
3. Press to confirm.
You may wish to lock the radio keys once you have
selected your channel (see next section).
Key lock
You can lock the keypad on your radio to prevent
settings being accidentally changed. When the key lock
is on, you will still be able to switch the radio on or off,
receive and transmit calls, adjust the volume, send a
call tone and monitor channels. All other functions will
be locked.
PTT
PTT
Using your mobile radios
Why use a sub-channel?
Use sub-channels to reduce the
risk of interference.
If the sub-channel (CTCSS) is set
to 0 then you will hear calls from
everyone within range who is using
the same channel as you.
To reduce this interference you
should select a sub-channel
between 01 and 38.
If you are using your radio with
another radio that does not use
sub-channels to communicate,
you will need to set the
sub-channel to 0.
CTCSS
Continuous Tone Coded Squelch
System.
When confirming new settings,
if PTT is not pressed within 5
seconds the new setting will
automatically be saved.
6196 BT Fway Pro Tw UG [2] 4/6/04 10:17 am Page 11