Filter
Top Products
3. Switch your radio ON keeping the volume low.
4. The display on your radio will show
VOX.
5. Insert earpiece into your ear.
Speak into the microphone on the headset. After a short
delay your voice will be detected and your message will
be sent. When you stop talking you will be able to receive
a message back from the receiving radio.
Adjust volume as required.
Sensitivity level (using your Freeway headset)
During Vox operation, you can change the sensitivity level
to suit the environment in which you are using your radio.
This will help minimise the risk of unintended noises
triggering a transmission and help pick up soft voices.
1. Press button 4 times. The display will show the
current sensitivity level (flashing) along with E.
2. Press or to select the sensitivity level:
1 – Low sensitivity, for noisy environments.
2 – Medium sensitivity, for most environments.
3 – High sensitivity, for quiet environments.
19Using your mobile radios
How to use the headset
The earclip, attached to the
headset, can be twisted to allow the
headset to be worn in either ear.
It is important to secure the earclip
before using the headset.
Step 1
Slide the earclip along the headset
moulding until it feels secure.
Step 2
Position earclip over ear as shown.
BT Freeway Pro Twin – Issue 02 – Edition 02 – 04.06.04 – 6196
6196 BT Fway Pro Tw UG [2] 4/6/04 10:17 am Page 19