Filter
Top Products
7
Setting the Clock, Time, Date and Related Functions
1
Turn the MODE/INFO control to highlight “Setup Options”
then press the control.
2
Turn the MODE/INFO control to highlight “Clock” then press
the control. You’ll see the menu screen shown at the right.
3
Turn the MODE/INFO control to move the highlight box to
the function you want, then press the control to select it.
4
Once the function you want is selected, turn the MODE/
INFO
or TUNE control to change the setting, then press the
control.
Note: There are additional menu selections not shown in this display example. Move the highlight box past
the “Year” menu item to select the “Month” and “Day” setting functions or the Exit function.
The settings on the “Clock Setup” menu are:
Auto: Yes/No – Select “Yes” to let the Solo XT set the time, year, month, and
day automatically using signals from a DAB station. Select “No” to set the clock
manually.
Format: 12 Hour/24 Hour – Sets the clock display to 12 hour or 24 hour
format.
Time: Sets the time.
Year: Sets the year.
Month: Jan-Dec – Sets the month.
Day: 1-31 – Sets the day of the month. The selection range depends on the
month. The February 29 on leap years is programmed into the clock.
Exit: Returns to the default display.
Note: If you manually adjust the Time, Year, Month or Day after you have set Auto to “Yes”, the setting
changes to “No”. Subsequent clock/calendar settings have to be done manually.
FM Radio
Tuning in an FM Station
1
Turn the MODE/INFO control to highlight “FM”. Press the control
2
Turn the TUNE control until the station frequency you want
shows in the display.
Note: If the station you select has been assigned to a station preset
the Preset indicator and number are displayed. See the next page for
more information.
FM Station Seek
Press the TUNE control. The Solo XT will seek up the radio band for
the next receivable station.