Filter
Top Products
8
Tuning in a Preset Station
1
Turn the MODE control to select Preset.
2
Turn the TUNE control to select the preset station you want.
The Preset indicator, the preset number and the station
frequency will light.
In this example AM preset 5, with station frequency 1050 assigned to it,
has been selected.
Removing One or More Presets
To remove one preset – Tune in the preset station as described above. Press and hold the TUNE control.
When the Preset has been cleared the station frequency, “radio” and the AM/FM band indicator are replaced
with “_ _ _ _” .
Note: You must tune in the preset you want to delete with the Preset source. If you tune in a radio station
that has been placed in a preset using the AM or FM source, you will see the Preset indicator and number in
the display, but you will not be able to delete the preset.
To clear all the presets – Using the Preset source, tune in any preset station. Then press and hold the TUNE
control for 10 seconds. You’ll hear 3 beeps indicating the presets have been cleared.
Alarm Clock Features
The Horizon Solo has two independent alarm settings. Each can have its own type of alarm —wake to tone,
wake to music or both. Both types of alarms start at a low volume level that gently increases.
Setting the Alarm Time
The alarm time can be set when the Solo is turned on or o.
1
Press and hold the ALARM 1 or ALARM 2 button for
one second. The alarm time and the or
icon will ash.
2
Turn the MODE control to adjust the alarm time.
3
Press the MODE control to set the alarm time.
In this example Alarm 2 is set to 7:15 AM.
Note: The alarm time can also be set by using the MODE
control to highlight the or icon. Then
press the MODE control and follow steps 2 and 3 above.