Filter
Top Products
6
Basic Control Operations
Turning the Solo On or O
Press the POWER/VOLUME control on the center of the front panel.
Adjusting the Volume
Turn the front panel POWER/VOLUME knob.
Note: On the control illustrations –
Regular arrows indicate to press and release the
button or control.
Double headed arrows indicate to press and hold the
button or control.
This symbol indicates the control is turned then pressed.
Setting the Clock
1
Turn the MODE control until the clock icon is highlighted
with brackets .
2
Press the MODE control. The clock icon and time display will
ash.
3
Turn the MODE control to adjust the time.
4
Press the MODE control again to set the time. The display
reverts to its previous mode and the new time is set.
Note: The clock can display time in either 12 hour or 24 hour
format. To change the time display turn the MODE control to highlight
the clock icon with brackets . Press and hold the MODE control for 5 seconds. The display will show “12H”
or “24H”. Turn the MODE control to select the time format you want, then press the control.
Radio Operation
Selecting a Source
1
Turn the MODE control until the source you want is
highlighted with brackets. Note that other function and
alarm setting control icons also may be selected.
2
Press the MODE control to select the highlighted item. Or
just wait a few seconds and the source is automatically
selected. The Solo begins playing the source selected.
Note: You can also select sources by simply pressing the MODE
control.Eachpresswillselectthenextsourceinthissequence:
AM > FM > AUX > Presets > AM, etc.
This illustration shows the FM source
highlighted for selection.