Filter
Top Products
35
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Switching on by means of cassette
insertion
If there is no cassette in the deck when
the device is switched off,
➮ press the button, 9.
The flip-release panel opens.
➮ Insert the cassette with the open
side to the right gently into the
drive until you can sense some re-
sistance.
The cassette is automatically drawn into
the drive.
As the cassette is drawn in, it must nei-
ther be held back nor assisted.
➮ Close the panel with gentle pres-
sure until you feel it engage.
The device switches on. Cassette play
starts.
SWITCHING ON AND OFF
Switching On and Off
The following methods are available for
switching the device on or off:
Switching On and Off with the
Vehicle Ignition
If the device is correctly connected to
the vehicle ignition, and has not been
switched off with the main button, 3, it
is switched on and off along with the
ignition.
You can also switch the device on when
the ignition is off:
➮ Press the main button, 3.
Note:
● In order to protect the vehicle bat-
tery, the device is automatically
switched off after an hour if the ve-
hicle ignition is off.
Switching On and Off with the
release panel
➮ Remove the release panel.
The device switches off.
➮ Replace the release panel.
The device switches on. The most re-
cent settings (radio, cassette, CD-
changer or AUX) are restored.
Switching on and off with button 3
➮ Press the button, 3, to switch on.
➮ To switch off, hold the button, 3,
pressed for longer than two sec-
onds.
The device switches off.