Filter
Top Products
48
Note:
● The CDC A 08 and the IDC A 09
will make random selections from
all the CDs in the changer. All oth-
er changers will first play through
all the tracks of one CD at random
before moving on to the next CD
in the changer.
Ending MIX
➮ Press button 5 MIX, >, until “MIX
OFF” is briefly displayed, and MIX
on the display goes out.
Sampling All Tracks on All CDs
(SCAN)
➮ In order to listen to short samples
from all the tracks of all the insert-
ed CDs in ascending order, hold
down the OK button, ;, for long-
er than two seconds.
“SCAN” appears in the display.
Ending SCAN
➮ To halt the scan, briefly press the
OK button, ;.
The track that is currently being sam-
pled will continue to be played.
Note:
● The duration of the samples can
be adjusted. For information on
setting the sampling duration, read
the paragraphs on “Adjusting the
Sample Time” in the “Radio Opera-
tion” section.
Pausing During Play
➮ Press the button 3 , >.
“PAUSE” appears in the display.
Continuing after the pause
➮ Press button 3 , >, during the
pause.
Play continues.
Naming CDs
In order to recognise your CDs more
effectively, the car radio allows you to
give individual names to up to 99 CDs.
The names may have up to seven char-
acters.
If you attempt to assign more than 99
names, the display will show “FULL”.
Entering and changing CD names
➮ Press the MENU button, 8.
➮ Use the or button, :, to se-
lect “CDC NAME”.
➮ Press the or button, :.
The device is now in selection mode.
➮ Choose the CD that you want to
name with the or button, :.
➮ Press the or button, :.
The device enters edit mode. If your
chosen CD is not yet named, seven
underscores appear in the display.
➮ The current entry location blinks.
➮ Use the or button, :, to se-
lect your characters. If a location
is to remain empty, select the un-
derscore.
➮ Use the or button, :, to
change the input location.
➮ To save the name, press the
MENU button, 8, or OK, ;.
CD CHANGER OPERATION