Filter
Top Products
36
Display Radio Passport Data
Using the supplied KeyCard you can show
the Radio Passport data such as the device
name, type number (7 6 ...) and the device
number in the display.
➮ Press the MENU button, 8.
➮ Press the or button, 7, until
“LEARN KC” appears in the display.
➮ Press the button, 7.
The Radio Passport data is shown on the dis-
play as moving text.
To leave the menu
➮ Press the OK button, 5, or the MENU
button, 8, to leave the menu. The set-
tings are then saved.
Care of the KeyCard
The KeyCard can only function properly if the
contacts are free from foreign particles. Avoid
touching the contacts with your skin.
If necessary, clean the KeyCard contacts us-
ing a lint-free cloth dipped in alcohol.
Switching on and off
There are a number of methods for switching
the device on or off.
Switching on and off with the
button 2
➮ Press the main button, 2, to switch on.
The device switches on.
➮ To switch off, hold the main button, 2,
pressed for longer than two seconds.
The device switches off.
Switching on and off with the
vehicle ignition
If the device is correctly connected to the ve-
hicle ignition, and has not been switched off
with the main button, 2, it is switched on and
off along with the ignition.
You can also switch the device on when the
ignition is off.
➮ Press the main button, 2.
Note:
In order to protect the vehicle battery, the
device is automatically switched off after an
hour if the vehicle ignition is off.
Switching on and off with the
KeyCard
You can also switch the device on and off by
inserting and removing the KeyCard, if the
device was not previously switched off with
the main button, 2. Read the chapter on
“KeyCard theft protection” for information
about inserting and removing the KeyCard.
SWITCHING ON AND OFFTHEFT PROTECTION