Filter
Top Products
STB & PVR Function
25
- Pan&Scan: The picture is displayed in full on your 4:3 TV screen,
but left and right sides of the original picture cannot be displayed.
z
Video Type: You can select either PAL for NTSC format. Most TV sets
support the PAL format in Australia.
z
Component Video: It is recommended to set the resolution of
component video output to fit to your TV set for the best quality
display. Please check the manual of your TV set to get the maximum
resolution for the component video input.
z
HDMI Video: If you set the HDMI output as Auto, the DP-H1
configures the best format of HDMI suitable for your TV set
automatically. But some TV sets do not support the auto-
configuration function. In this case, you have to set the resolution
manually: 480p, 576p, 720p or 1080i. Please check the manual of
your TV set to get the maximum resolution for the HDMI video input.
NOTE
z
The component video output supports SD (576i for PAL and 480i for
NTSC), 480p, 576p, 720p and 1080i.
z
If you set the video output resolution as HD (more than 576p), the
composite and S-Video outputs will be disabled automatically.
z
Please note that your TV set can not display anything if you set the
resolution of the video outputs higher than the maximum resolution
that your TV set can accept.
z
The HDMI setting, outputs the audio in digital format as well.