Filter
Top Products
CD CHANGER CONTROLSCD CHANGER CONTROLS
CD CHANGER CONTROLSCD CHANGER CONTROLS
CD CHANGER CONTROLS
Built into this radio are controls to operate an optional CD changer.
Please check with your Rampage/Audiovox car stereo specialist
or call 1-800-645-4994 for recommendations of the models that
will work with this radio.
Adjustment of the audio functions (volume, tone, balance, and
fader) for the CD changer operate in the same manner as they
do for radio play. The following controls will operate the CD
changer when it is installed and connected to this radio. Refer
to the owner’s manual included with the CD changer for instruc-
tions on the installation and correct loading and use of the CD
magazine.
do CD CHANGER MODE SELECTOR (MODE)
During radio or CD play, press this button to select operation of the
CD changer as shown by CDC on the display panel. Disc play will
begin and the disc and track number will be shown on the display
panel. If a new magazine has been loaded into the changer, play
will begin from the first track of the first disc in the magazine.
dp & dq DISC SELECT (D.UP & D.DN)
These buttons are used to select the desired disc for play. To
advance to a higher number disc, press the D.UP button dp To
return to a lower number disc, press the D.DN button dq. The
number of the disc in play will be shown on the display panel.
dr TRACK SELECT (+ / -)
The Track Select functions are used to quickly access the
beginning of a particular track. Each time the Forward Track
Select (+ ) in side of the button is pressed, the next higher
track number will be selected as shown on display panel. Simi-
larly, each time the Backward Track Select ( -) side of the
button is pressed, the next lower track number will be selected
as shown on the display panel.
ds CUE/REVIEW FUNCTIONS (+ / -)
High-speed audible search to any section of the disc can be made
by the Cue and Review functions. Press and hold the Cue (+ )
side of the button to advance rapidly in the forward direction (the
disc play symbol will rotate forward on the display panel) or the
Review ( -) side of the button to advance rapidly in the backward
direction (the disc symbol will rotate backwards on the display
panel).
dt TRACK/DISC SCAN SELECTOR (SCN)
When the SCN button is pressed, the SCN indication will appear
on the display panel, and the first 10 seconds of each track on
the disc will be played in order. When a desired track is reached,
press the SCN button once and play of the selected track will
continue (SCN will disappear from the display panel). The Track
Scan mode will also be canceled by activating the (Repeat or
Random Play functions).
When the SCN button is pressed and held, the DSN indica-
tion will appear on the display panel and the first 10 seconds of
the first track on each disc in the magazine will be played. When
-11-