Filter
Top Products
-5-
FM3 will appear on the display panel according to your selection.
Press the Mode button cs to return to disc play from the begin-
ning of the last track in play.
bm MANUAL UP/DOWN TUNING (+ / -) / AUTOMATIC
SEEK TUNING
The radio tuning function is normally in automatic seek tuning
mode. The radio will seek the next available station and stop at
that frequency. The Seek function can be stopped by pressing the
button again. The radio will return to the last tuned frequency.
To tune rapidly in an upward or downward direction, press and
hold either button. The radio will tune the entire band in an up or
down direction. When the desired radio frequency is reached,
release the button.
Pressing either button for 2.0 seconds will activate the manual
tuning function. MANUAL will appear on the display. Each time
the + button is tapped, the radio will tune one frequency step
higher. Similarly, each tap of the - button will tune one fre-
quency step lower.
bn AUTO-STORE TUNING (AS) PRE-SET SCAN TUNING (PS)
During radio operation, press this button momentarily to scan the
6 stations pre-set into the memories of that band. The unit will
stop at each pre-set station for 5 seconds before continuing to the
next pre-set station. During this time, the pre-set station number
(F) in the band will flash. Press the button again momentarily to
stop Pre-Set Scan operation and remain on the selected fre-
quency. The station number (F) stops flashing.
Pressing the button for longer than 2 seconds will activate the
Auto-Store Tuning feature which will automatically scan the
band and enter up to 6 strong stations into the 6 pre-set memo-
ries. After entering the stations into the memories, the unit will
automatically stop at each station for 5 seconds so each can be
heard. If you have already set the pre-set memories to your favor-
ite stations, activating the Auto-Store feature will erase those
stations and enter the new strong stations. This feature is most
useful when travelling in a new area where you are not familiar
with the local stations.
bo STATION PRE-SET MEMORIES
To set any of the 6 pre-set memories in each band, use the fol-
lowing procedure:
1. Turn the radio on and select the desired band.
2. Select the first station to be pre-set using the Manual Up/
Down or Automatic Seek Tuning Controls bm.
3. Press the pre-set button (1-6) to be set and continue to
hold it in. After approximately 2 seconds, a tone will sound
and the pre-set number will appear on the display panel,
indicating that the station is now set into that pre-set memory
position. The station can now be recalled at any time by
pressing that button.
4. Repeat the above procedure for the remain in pre-sets on
that band and for the other 4 bands on the unit.