Filter
Top Products
Specifications
Video System: NSTC Analog Composite Video (1V P-P, 75Ω)
A/V Switching: 3 channels
Power: 10-16 VDC, Negative Ground
Aux Audio Outputs: Left and Right Variable (800mV max, 8Ω load min.)
Left and Right Fixed (300mV typical, 600Ω load min.)
Current Consumption (stand-by mode): 67mA
Current Consumption (on, but no VCP): 635mA
Current Consumption (with one VCP on): 1.5A
Audio Noise Floor (30KHz BW): 1.164mV (-58dB re:1V)
THD+N @ -10dBV, 1KHz (30KHz BW): 0.356%
Cross talk @ 1KHz: 60dB
Maximum Input Level, Audio L and R: 800mV
Frequency Response, 20Hz – 20KHz: ±1.5dB
Frequency Response, 40Hz – 16KHz: ±0.5dB
Channel Balance: ±0.5dB, 0.05dB Typical
Volume Control: Dual 64 position log taper w/true 1dB/step accuracy
Unit Weight: 8.5 lbs.
Audio Output Min. Load Requirement: 4Ω
Note: Specifications are subject to change without notice.
Tuner cable ready when used in conjunction with other remote control from accessory list.
Warning
It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a television viewer or screen
that is located in the motor vehicle at any point forward of the back of the driver’s seat, or that is visible directly or
indirectly, to the driver while operating the vehicle. This product should only be installed to the rear of the back of the
driver’s seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle.
12