10
iPod DOCKING
This model includes adaptors for adopting different iPod
®
models. If the docking port will not be used for an
extended period of time, it is recommended to cover the docking port by using the "Dock Cover" insert
(included).
1. Select a suitable adaptor for your iPod
®
and insert it into the docking area. Your iPod
®
can now be
inserted into the docking port by placing the connector on the bottom of the iPod
®
onto the connector
in the docking bay.
Note: Please be careful when seating the iPod into the docking to avoid damaging the 30-pin
connector on iPod or docking system.
2. Press the POWER On/Off button to switch on the docking system.
3. Press the FUNCTION button repeatedly until the indicator "iPod" shows on the display. The iPod
®
will
start playing and charging automatically.
4. Select your desired EQ and play mode in your iPod
®
.
5. Press the VOL +/- button on the docking system to adjust your desired volume level.
NOTE:The volume level cannot be adjusted by the volume control of your iPod
®
after being
docked.
6. The iPod
®
is charging even during playback.
NOTE:The recharge function still operates in Radio, iPod and AUX mode.
7. To remove the iPod
®
from the unit, press and hold the PLAY/PAUSE button for three seconds to
switch off the device and then gently remove it from the docking connector.
You may control the playback of your iPod
®
by:
• Press the PLAY/PAUSE button to pause or resume the iPod
®
playback;
• Press the iPod Skip/Search Forward or Backward button to skip to the next or previous song;
• Press and hold the iPod Skip/Search Forward or Backward button for fast-forwarding or fast-
rewinding during playback.