Filter
Top Products
REPEAT/PLAY MODES
Every time the MODE button is pressed, the corresponding mode appears in the
display window.
INTRO PLAY
1. Press MODE button three times, then INT is displayed.
2. Press PLAY / PAUSE button, and starts INTRO play
from track no. 01.
3. Select INTRO mode during play, INT will flash.
• Press PLAY/PAUSE button, INT stops flashing and
INTRO play from track no. 01.
• Press >>I to hear the INTRO to the next track.
• Press I<<, to hear the INTRO of the previous track
PROGRAM PLAY
This allows selected tracks on the disc to be played in any order desired.
To set the program play
• Programs can be set in the STOP mode or normal play mode.
1. Press the PROG button, then PRG and starts flash.
2. Press I<< or >>I to select the desired track.
3. When desired track is displayed, press PROG button to
register. Then track No. display change to 00 again.
4. Repeat step 2 and 3 to program the order of more tracks.
Up to 20 tracks can be programmed into memory.
To complete programming and start play
Press PLAY/PAUSE button, then PRG stops flash and starts
play soon.
To clear programming
• Set the first program track to 00 and press the PLAY/PAUSE (>II) button.
• Open the door.
• Power Off
9
MODE
During playback
X 1
MODE
During playback
X 2
8
When this is showing on the
LCD display. The current track
on the disc will be repeated.
When this is showing on the
LCD display. All tracks on the
disc will be repeated.
NOTE: In normal mode none of the above symbols show in the display.
NORMAL PLAYBACK
Plays the entire disc.
A indicator appears on the display when the
batteries need to be changed.
MODE MODE MODE MODE
REPEAT
ALL
INTRO
RANDOM
REPEAT
1
NORMAL